Woodworking Magazine Blog

Amazing. I prefer Rob's method to Mr. Klausz's, but if I had a big bowsaw and several decades of experience, maybe I'd think differently.

In under four minutes both of them can cut dovetails that look better than the ones on which I spend the better part of an hour. Practice indeed.

Impressive!

I wonder how Rob's demonstration compares to what one would have seen wondering into a 19th century shop building draws on a piecework basis? Assume 4 minutes per corner and dovetails on all four corners, it would be 16 minutes per drawer for the dovetailing or 3 3/4 drawers per hour.

Just discovered Rob will be giving seminars at the Sterling Heights Woodcraft store on the Saturday I'll be at Berea. Poor planning on somebodie's part.

Frank's demonstration was amazing, and Rob's was equally or more amazing! I saw a video awhile back where they pitted someone cutting dovetails with a router and someone cutting them by hand. The guy cutting them by hand lost big time. I'd like them to redo that challenge with one of these guys at the end of the saw :).

Mike

And how long does it take to set up a dovetail jig and a router to do this?

:@)

That guy is a legend. I ahve some of his videos and he is a really incredible teacher, highly reccomended!

While certainly impressive, I actually find Klausz's video more so; Cosman is visibly hurrying. Still a lot better than I can manage.

Very impressive. I have to wonder about the use of pine though. Its softness is extremely forgiving. For these guys, no doubt the results would be similar in hardwood - like maple, but for the rest of us, 15 minute dovetails in hardwood might be worth the extra care.

Thought a note was needed here. Pine is easy to saw, easy to chisel but also has its own working characteristics. When you cut pins in Maple you split the knife line, do that in pine and you risk a loose fit. Pine pins need to be a little fat, just enough to compress and give you a good fit, go too far and you split the tail board. The same joint in Popular, Cherry, Walnut ect could be done in five minutes. When working on a project 10 to 12 minutes would be more realistic. Dont forget this was just for fun and a bit of entertainment. I like to keep the "tails vs pins" argument alive but I also support Frank in proving to folks that anyone can learn to cut dovetails and on a small scale it can be done faster than using a jig.

Rob,

I didn't mean any disrespect. All I meant to say was that it's been my experience that the harder the wood, the more exacting you have to be to ensure a gap free fit.

And TAILS FIRST all the way!!!

Thanks for the great demonstration.

WOW...that was impressive! Great job making something that is not easy look like you were sleepwalking. That killer saw you had was a big help. I'm on my way out the door right now to get one!

Take care,
Neil Broere
The Silent Woods Project
http://thesilentwoods.wordpress.com/

I guess the old adage is true, "practice, practice, practice!"

Well done!

I'm equally impressed that Rob is able to explain as he goes along what he is doing... not sure I could focus on cutting and talk about it at the same time. Definitely more difficult than walking and chewing gum.

I think anyone wishing to sell more instructional DVDs should take a page from this teaser... I'll be buying a couple of Rob's videos in the coming weeks.