Woodworking Magazine Blog

We were all bummed about news last week that "The New Yankee Workshop" was ceasing production. And, in case you've forgotten, this Saturday is Halloween.

I think you see where this is going.

I crossed the border from Missouri to Arkansas this afternoon, and I knew immediately I was home.

For starters, the land is achingly beautiful. I miss the Ozarks I grew up with, which are surprisingly unspoiled by development. Every curve in the rugged terrain brings a new vista. You might be high over a lake one minute, deep into a fog bank the next and then spiraling down switchbacks the next.

The roads are magnificently contorted, narrow and treacherous. In other words, it's a fun drive.

I drove to Indianapolis last weekend for dinner. Chris was demonstrating there at a Lie-Nielsen show, a friend who lives in California cashed in some frequent flier miles and flew in, and it’s always fun to see Angie and Alex and the rest of the show gang. And Chris has been raving about Brugge Brasserie, a restaurant that specializes in crepes, and has excellent French fries served with myriad dips.

When woodworking magazines publish plans for a reproduction of an antique, we show you the details you need to construct a facsimile. We give you part sizes, joinery details and tips on how to perform the major operations in a modern shop.

But rarely do we give you the social, communal and historical context of a piece. We never try to investigate the original maker's intentions, or discuss his or her relationship to the neighbors, family or village.

After 21 seasons, "The New Yankee Workshop" is closing its doors, and its much-beloved host, Norm Abram, is going to focus on his personal projects and PBS's "This Old House," according to Russ Morash, executive producer and director of "The New Yankee Workshop."

"Norm has done this for 20 years, and he thought it time to step back and do a little less," Morash said in a phone interview. "And because the show was so tied to him, we didn't want to replace him."

There has been lots of speculation among fans of the show and the woodworking press that the show was looking for someone to take the reins when Abram left. But Morash said he didn't think that would be a good idea.

"Comparisons would be inevitable (between Abram and a new host)," Morash said.

The decision to stop production of new episodes of "The New Yankee Workshop" was a mutual decision between Morash Associates Inc. and WGBH Boston, Morash said. But that doesn't mean that "The New Yankee Workshop" is gone forever.

A spokesman from WGBH declined on Tuesday to comment on the matter.

The show's web site, newyankee.com, will continue to operate. And Morash foresees putting shows or segments from the show on the Internet in a "You Tube-like situation" so future generations could enjoy and learn from Abram.

Morash also noted that Abram may some day change his mind and want to crank up "The New Yankee Workshop" again.

"Who can predict the future?" Morash said. "He may want to do this again."

In the meantime, Abram will continue to work on "This Old House," and his own personal projects, both building furniture and improving his house.

When asked why Abram chose to stop working on "The New Yankee Workshop" instead of "This Old House," Morash laughed.

"'This Old House' is a much easier deal," he said. "Norm actually had to work on 'The New Yankee Workshop.' It was a lot of work. And I certainly respect his decision to step back."

With the loss of new woodworking programming from "The New Yankee Workshop," many bloggers and woodworking writers are wondering if the craft itself is on the decline or if TV woodworking shows are no longer viable.

"My own view is that broadcast is dead," Morash said. "That's my personal take on it. Newspapers are dead. And print is dying. The only hope is the Internet. And it's my hope that you'll see lots  of Norm on the Internet in the future."

And what about the craft itself? Is that swirling around the drain?

"No. There is a fundamental human need to build," Morash said. "People will always want to polish their craftsmanship."

The other question is what's going to happen to the shop itself, which is stocked with all manner of machines and hand tools. Morash said he's personally looking forward to some free time so he can build a few things in the shop. As for the long-term plans for the shop, Morash suggested that the shop could be put on display at the Smithsonian.

"It could be like Julia Child's kitchen," Morash said, "which I'm told is one of the most popular exhibits there. Who wouldn't want to visit Norm's shop?"

— Christopher Schwarz

When I bought my first smoothing plane at a flea market in Burlington, Ky., I could fit everything I knew about handplanes into one of the Elvis Presley shot glasses I stumbled upon that weekend.

One vendor had a lot of smoothing planes on his table, so I picked up each one, took it apart like I knew what I was doing and inspected its guts. After that mummer's farce, I ended up buying the plane that felt good in my hands. After all, some of the planes were a bit heavy, and others had totes that were square.

In a move that will please traditionalists and people who pare, Lie-Nielsen Toolworks has started offering some plane irons and chisels made using oil-hardening (O1) steel – in addition to the more modern A2 steel.

There are some words we get in trouble for using in a woodworking magazine. Here are a few: "foolproof" (fools, we have found, are very clever), "holiday" (don't ask), and "sexy."

Sure, it's OK to put a half-naked woman on the cover of a magazine with "that word" in 42-point type in the checkout line at the market where I get my cheese curds and snack crackers. But put "that word" in a woodworking magazine, and people become rather put out – like you threw a dozen cuddly puppies into the river.

I've always been an advocate for low workbenches, especially for planing operations. My workbench is at 34" (and while standing on my horse stall mat it's 33"). And I've become quite fond of Megan's bench, which is at 30" (horse mat included).

But I can tell you that 16" is just too low. Yes, you really can get your weight right over the plane at 16", but then there's the problem of the occasional and inadvertent somersault.

— Christopher Schwarz

Toolmaker Ron Hock has a new book coming out soon and a new blog – both deal with sharpening. I had the privilege of reading the draft of the book, "The Perfect Edge" (Popular Woodworking Books) earlier this year. I think Ron has broken some new ground, especially on the topic of abrasives.